GE300 V2.0.6 for Mac and Windows is now officially available on the MOOER Website! Special thanks to everyone that helped with Beta testing! Please make a note of all changes and instruction before updating. Watch the tutorial here: ... 
What's new? GE300 Firmware Update v2.0.6 1. Added support for. GNR and .GIR sample files allowing GE Labs and MOOER Studio users to import these files to their GE300.
2. Increased number of load slots for Cab (.GNR) sample files, for a total of 50.*
3. Improved the microphone model in the CAB module.
4. Optimized the 2048-point sampling algorithm in the CAB module. Some conditions are limited. The default CAB sample is 2048 points and the POINT selection of the CAB module has been removed.
5. Brand-new“parameter preferencemenu. It offers two parameter adjustment modes. Users can access them from the PARA PREF menu.
6. Additional control footswitch mode has been added. There are now three footswitch control modes.
In FS mode 3, from the bank select page, you can access 8 preset patches via A, B, C, D and CTRL1, CTRL2, CTRL3, CTRL4.
Press a footswitch to select a preset patch. Press current preset patch footswitch again to access CTRL mode. You can use those 8 footswitches as 8 seperate CTRL footswitches.
Press Band Up/Down footswitch to back to preset select page.
Fixed bugs from Beta
1. Fixed bug with input level display.
2. Fixed bug regarding low output level caused by the microphone model.
3. Fixed bug with REAMP mode related to not being able to adjust the mix rate of wet/dry signal.
4. Fixed bug related to silent sample file.
5. In the“PARA PREF" menu, set the“Default" option as the default setting.
6. Deleted the sample point display in the CAB module.
7. Fixed expression pedal bug (In previous version, users needed to calibrate the expression every time after factory reset.)
GE300 Editor Software Update Notes:
1. Added new amp sample file type support (.GNR).
2. Added new cab sample file type support (.GIR).
3. Users can now quickly backup and restore presets.
4. Fixed a bug related to loading 32-bit IR files.
5. Fixed a bug that prevented users from renaming TONE CAPTURE files. Notice:
1. This firmware update will reset all data. Please backup presets before updating!
2. *After this update, the boot time of the GE300 will increase depending on the number of loaded sample files. (Boot-up time of 50 loaded sample files will be approximately 26 seconds.)
3. The Return module cannot be placed before the Synth module.
4. Microphone models have been changed. This may affect the tone of older preset files so please check and make adjustments if necessary.
5. Parameter preferences (PARA PREF) is set to“Default”as the factory setting. You can toggle these preferences between "Default" and "Maintain". Please see user manual for more information. Download here:
展开
