Specifications:
100% Brand New.
High quality and durable in use, Easy to install.
Material: Nylon
Size: 10 x 4.5''
Diameter of Shaft: 6.0mm
Thickness of center: 9.7mm
Recommended wheelbase: 550mm - 700mm
Recommended motor: 800KV - 1100KV
Package size: 30 * 20 * 5cm / 12 * 8 * 2 in
Package weight: 140 g / 5.14 oz
F450 Quadcopter Kit Frame
Fetures:
Made by advanced engineering material, super strong & smooth.
High quality and strong ability of anti-fall, lower maintenance cost.
Compact design with small numbers of components, you can assemble it by youself quickly and easily.
Suitable for both beginners and senior players.
Excellent quad-copter products.
Recommended config (Not Included):
A2208 OR A2212 800KV~1100kv brushless motor * 4 sets
ESC 15~25A * 4 sets
1800MAH~3600mAh 3S LiPo battery * 1 sets
1045 OR 8045 Forward&Reverse propeller * 4 sets
6CH Transmitter.
Speicifications:
Color: Red + White(There may be some difference in color, the received item should prevail)
Shaft distance: 17.7in/450mm
Heighten Broaden Landing Gear Skids
Features:
universal Tall Landing gear skids for DJI F450 F550 SK480 FPV aerial photo.
Description:
Brand Name: Hobbywing
Item Name: Hobbywing SkyWalker 60A UBEC ESC
Constant Current: 60A
Burst Current (>10s): 80A
BEC Mode: switch mode
BEC Output: 5V at 3A
Battery Cell: 2-6 cells Lipo,or 5-18 cells NiHH
Refresh Rate: 50Hz-432Hz
Dimension: 77 x 35 x 14 mm
Weight: 63g
Maximum speed: 210000 RPM (2 poles motor), 70000 RPM (6 poles motor), 35000 RPM (12 poles motor).
Features:
Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
Selectable program setting
Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.
Package size: 10 * 10 * 5 cm / 4 * 4 * 2 in
Package weight: 62 g / 22 oz
Package list:
1 * Hobbywing SkyWalker 60A Brushless ESC
5pcs 3.0mm RC Aluminum Bullet Propeller Adapter Holder for Brushless Motor Prop
Features:
Brand new.
High quality aluminum material.
Motor axle hole diameter: 3.0mm.
Suitable for brushless motors and speed controllers.
Delicate workmanship.
This original Walkera Runner 250 quadcopter parts feature high quality and durable performance, which is the best choice for you to enjoy more flying joys.
Features:
Easy to install.
100% Brand New.
100% Original Walkera brand.
High quality and durable in use.
Features stable and powerful flying experience.
Light weight and protable to carry.
Made of good and new technology material.
Specifications:
100% Brand New.
High quality and durable in use, Easy to install.
Material:Carbon Nylon
Size: 10 x 4.5''
Diameter of Shaft: 6.0mm
Thickness of center: 9.7mm
Recommended wheelbase: 550mm - 700mm
Recommended motor: 800KV - 1100KV
Package size: 30 * 20 * 3cm / 12 * 8 * 1.2 in
Package weight: 55 g / 1.9 oz
Features:
The F450 F550 FlameWheel frame arms are built from very strong materials
Provides better resistance to damage on hard landings
Package size: 25 * 12 * 4cm / 10 * 4.5 * 1.6in
Package weight: 220 g / 7.8 oz
Features:
This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use.
Highest efficiency 100% N-FET design.
No low voltage cutoff, because any cutoff in a multirotor = crash.
No over temp cutoff, because any cutoff in a multirotor = crash.
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
Features:
Model: 5040
Material: Plastic
Color: Orange+Black
Shaft: 5mm
Package size: 20 * 15 * 2cm / 8 * 6 * 0.8 in
Package weight: 12g / 0.4 oz
Package list:
1 * Pair 5040 Propeller 5*4 2-Blade Props CW/CCW Orange
1 * Pair 5040 Propeller 5*4 2-Blade Props CW/CCW Black
Features:
Brand new.
High quality aluminum material.
Motor axle hole diameter: 2.3mm.
Suitable for brushless motors and speed controllers.
Delicate workmanship.
Features:
Size: 8 * 4.5.
Very strong and light weight.
Are you fans of Hubsan H107D Mini Qudcopter? If so, you cannot miss this H107D-A01 Spare Body Shell.Made of high quality plastic material, this Body Shell is strong and durable in use.
Features:
Model: 6045
Material: Plastic
Color: Orange+Black
Shaft: 6mm
Package size: 20 * 15 * 2cm / 8 * 6 * 0.8 in
Package weight: 20g / 0.7 oz
Package list:
1 * Pair 6045 Propeller 6*4.5 2-Blade Props CW/CCW Orange
1 * Pair 6045 Propeller 6*4.5 2-Blade Props CW/CCW Black
Introduction:
The LED indicator is for APM/MegaPirate. There are four 3W led White/Red/Green/Bule on the board, and it can be setting light up method in Mission Planner.
The LED Indicator supported 5~30V input.
Features:
Model: 6030
Material: Plastic
Color: Orange+Black
Shaft: 5mm
Package size: 20 * 15 * 2cm / 8 * 6 * 0.8 in
Package weight: 13g / 0.4 oz
Package list:
1 * Pair 6030 Propeller 6*3 2-Blade Props CW/CCW Orange
1 * Pair 6030 Propeller 6*3 2-Blade Props CW/CCW Black
This high quality body shell is just designed for Hubsan H501S RC quadcopter. It's flexible, light and feeling good. Excellent choice for you to enjoy more flying joys.
Features:
100% brand new
Easy to install
Light weight and durable
Stable performance and high quality
Special for Hubsan H501S RC quadcopter
Features:
100% Original Top Selling X6 brand
100% Brand New
High quality and durable in use
Easy to install
Suit for:Top Selling X6 H108C H108CHD / Hubsan H107C
Material: Plastic
Model: H108C-01
Package size: 15 * 15 * 2cm / 6 * 6 * 0.8 in
Package weight: 16g / 0.5 oz
Package list:
1 * Original Top Selling X6 H108C H108CHD Part Body Shell H108C-01
This original Walkera Runner 250 quadcopter parts feature high quality and durable performance, which is the best choice for you to enjoy more flying joys.
Features:
Easy to install.
100% Brand New.
100% Original Walkera brand.
High quality and durable in use.
Features stable and powerful flying experience.
Light weight and protable to carry.
Made of good and new technology material.
Specifications:
100% Original Walkera brand.
100% Brand New.
Suit for: Walkera QR Y100 FPV Multirotor
High quality and durable in use.
Easy to install.
Package size: 12 * 11 * 6 cm / 4.8 * 4.4 * 2.4 in
Package weight: 43 g / 1.5 oz
Package list:
1 * Original Walkera QR Y100 FPV Multirotor Part Skid Landing QR Y100-Z-05
Note:Only shipping to Russia, Australia, Brazil, Canada, France, Germany, Britain, USA.
This original Walkera Runner 250 quadcopter parts feature high quality and durable performance, which is the best choice for you to enjoy more flying joys.
Features:
Easy to install.
100% Brand New.
100% Original Walkera brand.
High quality and durable in use.
Light weight and protable to carry.
Made of good and new technology material.
Specifications:100% Original Walkera brand.
100% Brand New.
Spare or Replacement part for Walkera TALI H500 FPV Multirotor.
High quality and durable in use, Easy to install.
Package size: 10 * 10 * 5cm / 4 * 4 * 2 in
Package weight: 57g / 2 oz
Package list:1 * Walkera TALI H500 FPV Multirotor Part Skid Landing Fixing Accessory TALI H500-Z-06
Features:
Model: 6045
Material: Plastic
Color: Green+Orange
Shaft: 6mm
Package size: 20 * 15 * 2cm / 8 * 6 * 0.8 in
Package weight: 20g / 0.7 oz
Package list:
1 * Pair 6045 Propeller 6*4.5 2-Blade Props CW/CCW Green
1 * Pair 6045 Propeller 6*4.5 2-Blade Props CW/CCW Orange
Specifications:
Max. Support 100A current
With dual channel BEC output distribution board
1CH 12V output, 1CH adjustable, support 3-20V voltage
Support 6S LiPo battery input
Each BEC support 2A stable output
Packagesize: 8 * 6 * 1cm / 3.1 * 2.4 * 0.4in
Package weight: 14g / 0.5oz
Features:
Original replacement fuselage cover for Syma X1-Bumblebee Helicopter.
Replace old or broken parts to give Syma X1-Bumblebee a new look.
100% Brand New.
This ABS protective cover is dust-proof and anti-collision which can protect the MI Drone camera well. A good partner for MI Drone!
(The drone in the following pictures is not included)
Features:
Protect the lens from dust and water during transportation and storage.
Support protecting the original lens cover.
Easy to install and remove.
Avoid scratch and other damage to the lens and gimbal.
Made of high quality ABS, light weight, feel comfortable.
The original R1104 7500KV brushless motor is designed to provide both quality and performance at an affordable price. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for micro FPV racing drone.
Features:
12 Pole 9 slot high-torque motor design
High purity copper windings maximizes efficiency
CNC machined aluminum heatsink case
Precision balanced rotor, smoothness for best reliability and maximum RPM
Suit for 60-90mm micro FPV racing drone
