Features:
USB 3.0 Port
Four standard USB 3.0 ports, with 9 contact points in total, ensure fast transfer rate.
High quality main control chip
Delivers low heat, fast speed and stable operation, to eliminate interference to the greatest extent.
All-Solid Capacitor
Each interface is provided with independent capacitor, ensuring the stable power supply, and delivering better high temperature resistance.
With power supply module
Provides 2A power supply, no external power supply required.
Stable Performance
PCB plate ensures high stability of electrical performance.
Features:
Allows to convert the MSATA interface into CE/ZIF interface.
Used for Laptop/PC.
Only supports 5cm SSD defined by mSATA interface in mini PIC-E,mSATA is not equal to 1.8 inch MICRO SATA.
Ensures the faster operation.
Easy installation,small body and stable performance.
Note: There are three interface definition of SSD,mSATA,SATA MINI PCI-E and PATA.Please be sure to distinguish the interface definition for your SSD.
No apple devices are supported.
Features:
Applicability.
Applicable for four different SSD length, for 3cm, 4.2cm, 6cm, 8cm M2 SSD.
Stable Performance.
Adopts the large capacity filter capacitor and high-power LDO Voltage Regulator chip to ensure the performance stability of the converter card.
Note.
The converter card supports only M.2 Bkey SSD (SATA), not for mkey Solid State Drives.
High Quality.
Maximize system speed by adding M.2 SSD performance and reduce overall power consumption, with a high efficiency M.2 SSD.
Function.
Converts an M.2 NGFF SSD into SATA (6Gbps) interface.
Dual USB 3.0 output provides fast data transfer rate up to 5Gbps that is much higher than USB2.0. Green PCB plate ensures high stability of electrical performance.
Features:
- Dual USB 3.0 output ensures fast transfer rate up to 5Gbps that is much higher than USB2.0.
- Generation lll NEC720202 main control chip delivers high stability, wide compatibility and increases data read and write speed by 10 times.
- Built-in SATA power supply interface ensures that the USB 3.0 external device is fully powered, and meet the USB 3.0 5V 900mA standard output.
- Converts two USB 3.0 ports from the motherboard PCIE slot.
- With power supply module, enables to plug in the motherboard. No external power supply required.
- Interface protection chip allows to automatic power off to protect your computer and peripherals in the case of short-circuit / over-current / over-voltage and other emergency situations.
It converts the NGFF M-key SSD to (for) 12+16Pin 2013 2014 2015 Macbook Air/Pro SSD.
Features:
Converts 2280 PCIe x4 M.2 AHCI NGFF into (for) 2013 2014 2015 Macbook Air A1465 A1466 and MacBook Pro A1398 A1502 SSD.
No additional driver needed.
It won't change your PC performance. So don't worry about that.
Features:
USB 3.0 Port
Four standard USB 3.0 ports, ensure fast transfer rate up to 5Gbps.
High quality main control chip
Delivers low heat, fast speed and stable operation, to eliminate interference to the greatest extent.
Interface Protection & Solid Capacitor
Each interface is equipped with independent interface protection to allow power dump in the case of short circuit and over-current of USB device, to protect the computer from being damaged, and automatically restore when faults remove and with an independent solid capacitor to ensure stable power supply to each interface, with high temperature resistance.
With power supply module
Provides 2A power supply, no external power supply required.
Stable Performance
PCB plate ensures high stability of electrical performance.
Comes with a 2U Low-profile bracket
Low-profile bracket provides the option for installation in small size HTPC case.
Gold finger
Features good conductivity and strong oxidation resistance, to ensure more stable transmission.
PCI-E Mini 52Pin PCI Express adapter card for Apple Wireless network card. It converts Apple wireless card to mini PCI-E 52Pin interface.
Features:
Support for Apple Mac BCM94331CD, BCM94360CD, BCM94360CSAX, BCM9436CS2.
No driver is needed. It is easy to install.
Plug and play.
Features:
- VIA VL805 Chip that supports the 5Gbps SuperSpeed USB 3.0 standard delivers high stability, wide compatibility and increases data read and write speed.
- Conforms to USB 3.0 specification Revision 1.0 version.
- Supports USB 3.0 Super-Speed (5Gbps) and High-Speed (480Mbps) and Full-Speed (12Mbps), and USB 2.0/1.1/1.0 standard.
- Compliant with PCI-Express Version 2.0, USB3.0 SuperSpeed Version 1.0, xHCI specification 0.95.
- Supports USB plug and pay, for easy operation.
- Supports for Windows2000/xp/vista/7, 32-bit and 64-bit systems.
- Built-in large 4P power supply interface.
- Gold finger features good conductivity and strong oxidation resistance, to ensure more stable transmission.
- With Power Supply Modules, no external power supply required.
- PCB plate ensures high stability of electrical performance.
Features:
- Supports to extend two SATA 3.0 ports.
- PCI-E single chip design,supports dual SATA 6Gbps ports.
- Compliant with PCI-Express Basic Rev 2.0, Rev 1.0.
- PCI-E throughput reaches 5.0/2.5 gbps for single line.
- Compliant with PCI-E Mini Card Electrical s Revision 1.2.
- Compatible with Serial ATA AHCI Rev 1.2, bus master IDE ATA controller programming port Rev 1.0.
- Supports SATA 3.0 transfer rate up to 6 gbps, compatible with SATA-II (3 gbps) and SATA-I (1.5 gbps).
- Supports for Gen1m and Gen2m SATA PHY.
- Supports for native command queuing (NCQ) and port multiplier.
- Compatible for computer systems with Mini PCI-E slots, for Windows® 10/8/7 (32 / 64 bit) / Vista / Server 2003 / XP / 2000 Linux.
Features:
- WCH382L chip ensures the best compatibility and stability.
- High data transmission rate up to 1.5MBMbyte/second.
- Easy operation, supports plug and play.
- Compliant with PCI-Express 1.0 a specification.
- Supports 2.5/s full duplex channel of PCI-Express.
- Compatible for Windows 98se/me/2000xp/server 2003/xp 64bit / Vista, Linux, Dos, WIN 732/64, WIN 10.
- Suitable for parallel printer (Tax Printer), POS machine, label printer, etc.
Features:
This adapter card is only suitable for MacBook Pro A1708 model.
Support M.2 NVMe key M 2230/2242 type SSD, not support SATA key B/B+M SSD.
Convert the SSD to M.2 NVMe M-key interface, ensure faster operation speed.
The golden finger design enhances the service life and good electrical performance of the adapter card.
No soft driver and additional power required, easy to use.
Small size and stable performance.
This converter can adapt SD card to 44-Pin standard ATA IDE interface.
Features:
Small footprint, compact design, easy operation.
No driver required.
Supports DMA and Ultra DMA modes, compatible for DOS，NT4，WINDOWS98SE，ME，2000，XP，VISTA，MAC，Linux system.
SD card will be bootable with OS or application software. Its power is from 44-Pin IDE interface.
It has two master chips, and one SD card slot on the back.
Note:
For soft routing, SD card capacity within 1G enough; for WIN98, WIN ME, WINXP system Installation, SD card capacity is best more than 2GB. Please select a high-power flash memory card if you require high speed.
Description:
This product is an adapter that converts M.2 NVME SSD NGFF to PCI-E X4.
Features:
Only support PCI-E M.2 interface PCIE X4 and PCIE X2 SSD.
PCIE X4 transport protocol M.2 SSD includes AHCI protocol SSD and NVME protocol SSD,please note that Windows7 can not recognize the NVME protocol SSD.
Support 2242 2260 2280 NGFF SSD.
PCB plate ensures low power consumption and more stable transmission.
The fan improves the heat dissipation of the expansion card and prolongs its service life.
Features:
- Comes with 2 pin to 9 pin USB cable to connect from adapter card to 9 pin USB header on motherboard to activate BT function.
- Convert NGFF card to standard PCI-e card in order to work on desktop computer.
- Supports A+E key and E key M.2 wireless network card of PCIE protocol.
- Dual antenna ensure pure and stable wireless signal.
- The adapter card changes only the interface of the wireless module, but does not change the performance of the module.
Features:
SO DDR3 204PIN memory test protection card.
Suitable for notebook computers.
No additional driver required.
4-tier PCB design to reduce signal loss and EMI.
The golden finger design enhances the service life and good electrical performance of the adapter card.
The device is compatible for industrial control computer, communication, LED control, POS machine display, carving machine, cutting plotter and other 9-pin serial port universal devices.
Features:
- Supports standard serial mode.
- Easy installation, fully plug and play, convenient and efficient.
- Works greatly for Windows 2000/xp/server 2003/xp 64 pit/Vista/win7.
- Compliant with PCI express 1.0 a specification.
- Features automatic identification.
- Output 2 independent 9-pin standard serial ports, allow to connect various serial devices.
- Fast transfer speed of data up to 110-230400Bps.
Features:
- USB 3.0 output ensures fast transfer rate up to 5Gbps that is much higher than USB2.0.
- Provides more power when needed, and automatically reduces power consumption when not needed, and USB 3.0 provides more power to support devices that require more power to drive.
- Extends USB3.0 interface on PC with PCI-Express slot.
- Comply with USB3.0 interface specification, xHCI Revision 0.95 specification and PCI Express2.0 bus specification.
- Compatible with USB 2.0, 1.1.
- 900mA current supply to power external devices.
- Easy installation, fully plug and play, convenient and efficient.
- Works greatly for Windows 2000, XP, Vista, WIN7/WIN8, win10 OS.
Description:
This is a mini PCI-E to USB adapter card which supports 3G/4G modules of many brands.It is used for rooting, debugging,testing and unlocking of the Internet and 3G modules via USB.It can also be used for USB bus WiFi module (USB bus) and Mini PCI-E interface card (USB bus) to test via USB.
Features:
Added a module lock to fix for reliability and stability.
4 screw holes offer maximum convenience for small crate.
Enlarge the distance between SIM slot and back row components, conveniently detach SIM card.
Added a USB 4 wire input port,which can directly weld USB cable.
Mini PCI-E design complies with the 1.30 version of the industry specification.
USB is designed to comply with the USB2.0 industry specification, backward compatible with 1.1 specifications.
Suitable for modules such as full-height (30*50-51mm) 4G/3G (USB bus).
Working status can be viewed through LED real-time display.
No software drivers required.
Please Note:
This is Mini PCI-E to USB adapter card, not 3G/4G network card.This product does not contain 3G/4G module,if there is no 3G/4G module,it is unable to surf the internet!This adapter card is mainly used for DIY or testing 3G/4G modules.
