Features:
Excellent adhesion, ultrabase covered by microporous coating, shows strong adhesion in printing.
Very easy to take off the models, no tools needed when removing models.
Use clips to fix the glass plate on the hot bed, super flatness, fast and uniform heating.
High temperature higher sticky, the models will stick on bed firmly when temperature is high.
Durable, the special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
Easy to clean by alcohol/water.
Fit for Ender 3 3D printer.
 

Features:
High quality photopolymer resin with high hardness(84D), low odor and non-toxic,
General-purpose rapid resin, with great hardness and toughness, low shrinkage, can achieve better printing effect.
Good fluidity and fast curing speed, which can significantly reduce printing time.
The surface of finished articles is smooth and high precision for comfortable feeling.
Compatible with most DLP/LCD light curing 3D printer, and widely used in teaching, toy design, jewelry, handicrafts, etc.

Features:
Ink cartridge is suitable for Handheld PrintPen Printer.
Open package and take out ink cartrige, remove the cartridge cover and blue tape before use.
Fasten it with the protective cover when not in use.

Features:
Avoid losing steps and jittering, good heat dissipation, immersion gold process, ultra quiet.
Large heat dissipation area, good heat dissipation effect.
StealthChop can driver the motor to work under extreme silence.
SpreadCycle: The motor controlled by the PWM chopper mode operated more smoothly and without jitter.
It can effectively avoid problem such as running deviation losing step and fault caused by the overlong of the chip.

Specifications:
Configuration: STEP/DIR or UART(Optional)
Quantity: 1pc/4pcs/5pcs(Optional)
Microsteps: Up to 1/256
MicroPlyer: 1/256
Logic Voltage: 3.3V/5V
Input Voltage Range: 4.75-36V
Motor Phase Current: 1.2A RMS,2.0A Peak
Single Wire UART: For Advanced Configuration Options
Low Rdson: LS 280mO & HS 290mO(typ.at 25?)
Item Size: 2.0 * 1.5cm / 0.8 * 0.6in
Package Size: 5.5 * 4.5 * 3.0cm / 2.2 * 1.8 * 1.2in(1pc)
                      9.9 * 5.9 * 3.6cm / 3.9 * 2.3 * 1.4in(4pcs)
                      9.9 * 5.9 * 3.6cm / 3.9 * 2.3 * 1.4in(5pcs)
Package Weight: 15g / 0.5oz(1pc)
                          38g / 1.3oz(4pcs)
                          42g / 1.5oz(5pcs)
                   
Packing List:
1 * Driver
1 * Heat Sink
1 * Cable(Random Color)

Features:
Environmentally friendly resin is synthesized by lactic acid extracted from corn. Good biocompatibility, lower smell and irritation than other resin.
High toughness, the printed product is not easy to break, easy to process, able to withstand some impact and vibration.
Fast curing speed, good fluidity, low shrinkage, smooth surface and high precision, perfect printing details.
Compatible with 395nm to 405nm wavelength LCD 3D Printers. Widely used in industrial applications, architectural model, jewelry, dental care, toy design, daily design, etc.
Thickened aluminum bottle, not easy to dent, adding inner plug for leakage-free, blocking out the light completely, preserving the resin in good condition.

Features:
4pcs Idler Pulley Wheel, outer diameter 24mm, 5mm bore diameter.
Adopting premium material, POM + Carbon Steel, sturdy and wear-resistant.
Dust and foreign matter prevention, high speed, stable performance.
Compatible with Anet E16/ET4/ET4 PRO/ET5/ET5 PRO, Creality CR-10/CR-10S/CR-10 V2/Ender 3 and so on.
Suitable for 3D printer, CNC, writing machine and other mechanical equipment.

Features:
MKS independently developed the MKS DLP motherboard and related slicing software to promote the development of LCD photocuring 3D printing in terms of cost and solution.
The MKS DLP motherboard uses an integrated solution, which integrates the main control and video memory processor on the motherboard and directly connects to the 3.5-inch touchscreen, which is equivalent to "four-in-one" traditional solution, which greatly reduces the cost.
Currently supports direct connection to Sharp 5.5-inch 2k HD imaging screen, and supports USB offline printing.
In order to facilitate the user to modify the functions, MKS has open sourced the motherboard schematic diagram, firmware and slicing software MKS DHOST.
Please see the official link for details. https://github.com/makerbase-mks/MKS-DLP

Features:
High quality TC4 Titanium alloy nozzles.
0.2/0.3/0.4/0.5mm nozzle size for option.
High strength, high heat resistance.
Good corrosion resistance, Wear resistance
Finer processing.

Features:
Lead screw nut for Anet ET4 ET4X ET4PRO ET5 ET5PRO and other series models 3D printer.
Used in conjunction with T-shaped screw, smooth and unobstructed movement;
Easy to use, no need to process;
Anti-slip, anti-corrosive and wear-resistant.

Features:
GT2 PU material timing belt, excellent workmanship, better quality and more durable.
Shock absorption, low noise, no slip, long service life, high transmission efficiency.
360 °rotation is not easy to break, wear resistance. Good flexibility and stability.
Design for small precision machinery transmission, such as 3D printers, intelligent plotter, etc.
Length: 10 meters / 32.8ft, width: 6mm / 0.2inch.

Features:
Self-adhesive label tape, black print on yellow, ideal for home, office, organization, cable, logistics, etc.
Direct printing with thermal transfer technology, no ink cartridge required, environmental friendly.
Waterproof, oil-proof, wear resistant and corrosion resistant, clear printing and can be saved for a long time.
8.5m/roll label tape can be cut into labels of any length according to your needs.
Integrated label tape with multiple sizes for option, strong adhesion and convenient to use.

Features:
The main function is lubrication, not easy to dry and not easy to flow, and can prevent rust.
Can effectively reduce the friction between parts and improve the smoothness of movement.
Reduce friction noise and extend service life.
Suitable for 3D printer, engraving machine screw, optical axis, guide rail and other transmission systems.

Features:
Self-adhesive label tape, winding pasting, ideal for wire and cable organization.
Direct printing with thermal transfer technology, no ink cartridge required, environmental friendly.
Waterproof, oil-proof, wear resistant and corrosion resistant, clear printing and can be saved for a long time.
8.5m/roll label tape can be cut into labels of any length according to your needs.
Integrated label tape with multiple colors for option, strong adhesion and convenient to use.

Features:
3-pack color ink cartridges and 108 sheets photo paper, compatible with Canon CP series photo printers.
Thermal sublimation printing technology, ink free printing, printing and drying, convenient and fast.
High-definition printing, which can restore the original color of the photo, high glossy and long lasting without fading.
Automatically film covering for photos can prevent oxidation discoloration, waterproof, anti-fingerprint, etc.
4x6 inch print size for you to print photos and ID photos, convenient and easy operation.

Features:
Upgrade 3D printers such as Creality 3D Ender3/3S to dual z-axis to improve printer stability.
After the upgrade of dual Z axis, the x-axis rises steadily and runs smoothly, which completely avoids the bottom consumables stacking pressure, reduces the lamination caused by z-axis vibration, and greatly reduces the leveling difficulty and leveling times.
Compared with the upgraded double Z kit sold on the market, this kit contains a power fixed module, which no longer allows the power supply to be scattered freely to avoid electric shock and short circuit.
No need to weld or replace the motherboard, directly insert the one to two motor wire into the motherboard.
Use original T8 precision screw rod, it runs smoothly.

Features:
DIY tool model grinding strip.
178*20*3.6mm size. Includes 10pcs.
For the uneven surface of the model, it has obvious treatment results.
Suitable for 3D printing models.

Features:
4pcs upgraded compression mold spring, suitable for i3 3D printer such as Anet A8 A6 ET4 ET5 Creality 10/10S Ender 3.
Made of high-quality steel, high hardness, not easy to deform, and with characteristics of fatigue resistance and good toughness.
The surface of the spring is strengthened, the structure is firm, and the service life of the spring is extended.
For high stress, high speed vibration, heat resistance can play an excellent effect.
Make the heated bed leveling more smooth, the platform is more stable when printing, and it is not easy to shake.

Features:
Environmentally friendly resin is synthesized by lactic acid extracted from corn. Good biocompatibility, lower smell and irritation than other resin.
High toughness, the printed product is not easy to break, easy to process, able to withstand some impact and vibration.
Fast curing speed, good fluidity, low shrinkage, smooth surface and high precision, perfect printing details.
Compatible with 395nm to 405nm wavelength LCD 3D Printers. Widely used in industrial applications, architectural model, jewelry, dental care, toy design, daily design, etc.
Thickened aluminum bottle, not easy to dent, adding inner plug for leakage-free, blocking out the light completely, preserving the resin in good condition.

Features:
Direct extruding kit, smooth feed-in. Equipped with high quality stepper motor, reducing the possibility of nozzle blockage.
All metal structure, durable and wear resistant. Full assembled, easy to install.
Compatible with more types of filament when printing under high temperature, like flexible TPU.
Includes a 0.4 nozzle, 2 cooling fans, a backplate, a stepper motor, etc.
A great accessory for Ender-3 Series 3D Printer.

Features:
Aluminum hotbed can be a perfect replacement accessory for CR-10S Pro/CR-X 3D printer.
Come in size 310 * 320 * 3mm, easy and quick to install, strong and durable.
Perfectly integrating heating table and aluminum substrate into one, better temperature stability.
Equipped with thermal insulator cotton, heat-resistant, low thermal conductivity, shock absorption and sound absorption.
24V working voltage, 430W power, save electricity and energy saving.

Features:
High quality photopolymer resin with high hardness(84D), low odor and non-toxic,
General-purpose rapid resin, with great hardness and toughness, low shrinkage, can achieve better printing effect.
Good fluidity and fast curing speed, which can significantly reduce printing time.
The surface of finished articles is smooth and high precision for comfortable feeling.
Compatible with most DLP/LCD light curing 3D printer, and widely used in teaching, toy design, jewelry, handicrafts, etc.

Features:
Made of high quality aluminum foil with flame retardant, high temperature resistant, corrosion resistant, enabling safe printing.
Thermal insulation keeps the printer in a constant temperature printing environment and reduces the impact of low temperature on printing.
The enclosure is stable and difficult to shake. Detachable for easy transportation and storage.
Waterproof and windproof, enabling a constant temperature printing under complication conditions.
Premium protection cover, compatible with Ender-3 Series/CP-01/Ender-2/CR-100 3D printers.

Features:
Leveling nut kit for Anet A8 ET4PRO ET5 Creality Ender-3 3D Printers.
Nuts are made of high quality plastic, durable and wear resistant.
Upgraded hand twist leveling nut to make the hot bed become more stable.
Large size leveling nuts will make it more easier to level printing platforms.
The surface of the spring is strengthened, the structure is firm, and the service life of the spring is extended.

Features:
Refined aluminum material, durable and suitable for Anet ET4 ET4X ET4PRO ET5 ETPRO 3D printer hot end.
M6 mounting hole works well with nozzle & nozzle throat.
M3 inner holes for thermocouple & mounting screw.
6mm diameter hole for mounting heater.
Good accessory for 3D printer DIY lovers.

Features:
40 * 40 * 10mm (1.6 * 1.6 * 0.4in),  cable Length: approx. 50cm / 19.7in, suitable for Anet ET4 ET4X ET4PRO 3D printer extruder hotend.
DC brushless cooling fan with rated power DC 24V, 0.04A.
5000r/min rated speed, with low noise.
2 wires with pin connection, easy to DIY installation.
A replacement fan with good heat dissipation effect, best for your printer extruder.

Features:
40 * 40 * 10mm (1.6 * 1.6 * 0.4in),  cable Length: approx. 50cm / 19.7in, suitable for Anet ET4 ET4X ET4PRO 3D printer extruder hotend.
DC brushless cooling fan with rated power DC 24V, 0.09A.
5000r/min rated speed, with low noise.
2 wires with pin connection, easy to DIY installation.
A replacement fan with good heat dissipation effect, best for your printer extruder.