Features:
It can convert the standard Wii output into an HD compatible device allowing audio and video to be carried over a single HD cable. 
It detects Wii display modes including NTSC 480i, 480p, PAL 576i automatically, and upscales them to HD 720P or 1080P. 
The extra 3.5mm audio socket brings your convenience to connect headphone or speaker. 
Video and audio in full digital HD format, no transmission loss.
Supports all Wii display modes (NTSC 480i 480p, PAL 576i). 
HD upscale to 720p or 1080p high definition output.
Provides advanced signal processing with great precision, colors, and resolutions.
No power adapter, no messy cords—just one HD cable. (HD cable not included)
Plug and play.

Note:
1. It only support monitor and smart TV with HD port.
2. HD compatible device must support 720p or 1080p.

The HD Amplifier Splitter includes one input HD port and two output HD ports. It can distributes the input HD signal from HD source devices (such as, STB, DVD, HD-DVD, for PS3, Xbox360, etc.) into two identical output signal simultaneously, and it supports full 3D format and the maximum resolution up to 1920 * 1080P. Its maximum bandwidth is up to 225MHz (Its maximum baud rate is up to 2.25Gbps). The HD Amplifier Splitter is perfectly compatible with HDTV, Monitor or Projector, etc. This item offers great solutions for noise, space and security concerns, and it is widely applied to the show field, the data center control, information distribution, conference room presentation, school and corporate training, etc.

Features: 
The DMI Splitter has many features that enable it to perform in a superior manner. Among those
 features you will find:
Includes one input HD port and two output HD ports.
Supports Full 3D and 1080P / 60Hz.
Supports highest video resolution 1080p.
Supports 225MHz / 2.25Gbps per channel (10.2Gbps all channel) bandwidth.
Supports 30bit / 36bit deep color.  
Supports CEC.
Supports Blue-ray 24 / 50 / 60fs / HD-DVD / xvYCC.
Supports Digital Audio Formats: DTS-HD / Dolby-trueHD / DTS / Dolby-AC3 / DSD / HD (HBR)
Supports Signal Retiming.
Supports input up to 15 meters AWG26 HD standard cable length, output up to 20meters AWG26 cable length. 
No loss of quality.  
The Splitter can also be placed at the end of a long HD cable to regenerate the HD signal. 
Easy to Use, install in seconds, no need of setting and supports plug and play.
Note: If power supply is insufficient, you can also connect the external power adapter (Powered via the included Micro USB port).

The HD surge protector is used to protect the HD devices from Electrostatic discharge, Cable Discharge Events or for Lightning. It is active on all TMDS channels and will act as a final defense for ESD and for lightning surge.

Features:
Compliant with HDM1.4, HDCP.
Protect HD Input and Output for ESD and lighting surge. 
Meet IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact). 
Meet IEC 61000-4-4 (EFT) 40A (5/50ns). 
Meet IEC 61000-4-5 (for Lightning) 5A (8/20µs). 
Spark voltage / Current protection.
With compact portable design, and easy to use, support plug and play.

1080 line 3D HD output. Support for blu-ray, PS3 and other multimedia HDM3D output devices, makes the wonderful 3D world within reach.

Features:
It has signal buffering and amplifying capability, it can be transmitted over a distance of 15 meters through a series of methods.
The number of HD output ports can be significantly improved by stacking methods, easily connect to a multichannel audio receiver, fully support HD1.4, HDCP.
Support 480p, 576p, 720p, 1080i, 1080p, 4K*2K@30hz resolution, support 3D video format for audio format dts-hd/dolby-true HD/LPCM7.1/DTS/ dolby-ac3 /DSD.
Support using standard AWG26 cable input support 15 meters, output support 15 meters (1080P and lower resolution) and input support 8m, output support 10 m (4K resolution).
Connect the high definition signal source to the input port of the distributor through an HD cable, connect the output end of the distributor to the monitor via HD cable.

Features: