25 Best Affordable Battery Mount Adapter 202025 Best Battery Mount Adapter 2020
Features:
Replacement for LP-E8; Fully coded, plug and use directly.
Suitable for Canon Rebel T3i, T2i, T4i, T5i, EOS 600D, 550D, 650D, 700D, Kiss X5, X4, X6 & etc.
Upgraded dual USB connectors ensure longer and stabler power supply.
Can connect to 5V 1A/2A power pack; DC output 8V.
Ideal for long time camera shooting indoors and outdoors.
Features:
Our product has been designed to connect power bank (5V, 2A-4A) when shooting a long time outdoors to provide uninterrupted power supply. Upgraded version dual USB port design provides your camera strong and stable power.
Works for Canon cameras which use the batteries LP-E6. Compatible camera models: For EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D Mark II, 7D Mark II, 5DS, 5DS R, 6D, 60D, 60DA, 7D, 70D 80D.
USB Input: 5V, 2A-4A ; DC Output: 8.0V.
Featured with over-charging, short-circuit, high-temperature, and surge protection.
Keep your camera full of electricity anytime, ideal for long time photography or videography, it can be kept for emergencies, make sure you never miss the precious moments. Newest smart and intelligent IC make sure your device safe.
Features:
Universal F970 battery plate with 4pcs screw for monitors.
Mainly made of plastic, more lightweight.
Compatible with NP-F970 F550 F770 F970 F960 F750 battery.
With 4 mounting screws, the battery plate can be easily installed and fixed on a monitor.
Compatible with all VESA monitors of 75mm hole spacing, such as for LILLIPUT 669 619 869 series monitors, for FEELWORLD FW689 FW619, for Andoer FW970 AD-701 etc...which screen is less than or equal to 10-inch.
FOTGA DP500III power supply system is of high utility. It can be a battery plate and charger for V-mount battery. Multiple output ports (5V 2A / 8V 5A / 12V 5A / 14.8V / USB) are suitable for most cameras and camcorder. Angle adjustable 15mm rod clamp can be mounted on rail rod or detached. For occasions that needs multiple output interface, this stackable power supply system will certainly be a nice choices.
Features:
2 in 1, can be V-mount battery plate and battery charger.
Support 110 ~ 240V AC power supply, great for indoor long time shooting.
You can switch power supply between battery and AC power freely, PMIC（Power Management IC）technology ensure no power interruption.
Multiple output ports: 5V 2A / 8V 5A / 12V 5A / 14.8V / USB.
Large output power, suitable for cameras adopting 7V -9V V-mount battery, and the 14.8V output port support most large camcorders of 12V -16.8V wide voltage input.
The detachable rod clamps can be mounted on 15mm rods, 90°angle adjustable.
A belt clip on the back for hanging the battery plate.
All metal constructed, hard and durable.
The AC adapter port and BP charger port allow multiple stack to extend out multiple output interfaces for devices/cases in need of multiple input supplies.
Features:
Fully Decoded External Dummy Battery Kit for Sony a7R, a7R II, a7S, a7S II, a7, a7 II, a3000, a5000, a5100, a6000, a6300, a6500, a33, a35, a37, a55.
For Sony NEX 3 series(Alpha NEX-3, NEX-3A, NEX-3C, NEX-3CA, NEX-3CD, NEX-3D, NEX-3CH, NEX-3H, NEX-3CK, NEX-3K); NEX 5 series(Alpha NEX-5, NEX-5A, NEX-5C, NEX-5CA, NEX-5CD, NEX-5D, NEX-5H, NEX-5CH, NEX-5K); NEX 7 series; DSC-RX10, DSCRX10/B, DSC-RX10 II, DSC-RX10 III.
USB Power Input: 5V, 2A-4A (at Least 2A Current, Up to 4A if needed); Output: DC 7.6V, connect directly to power bank and you don't Need a wall plug any more.
100% Safety Protection: Passed CE certification, bulid with premium high quality IC chip inside, we provide your device fully protection from being over-charging, short-circuiting, overheating or overloaded.
Package includes: 1 * NP-FW50 DC coupler; 1 * 1.2M dual port USB DC converter power cable.
Features:
Replacement for DMW-DCC8; Fully coded, plug and use directly.
Suitable for Panasonic DMC-FZ200, DMC-FZ1000, DMC-GH2, DMC-G5, DMC-G6, DMC-G7, Lumix GX8 G85 & etc.
Upgraded dual USB connectors ensure longer and stabler power supply.
Can connect to 5V 1A/2A power pack; DC output 8V.
Ideal for long time camera shooting indoors and outdoors.
D-Tap male to XLR 4-pin female adapter cord, fast and stable transmission speed, it is used to power camcorder, monitor or other photography devices via v-mount battery.
Features:
D-Tap male to XLR 4-pin female adapter cord.
Used to power camcorder, monitor or other photography devices via v-mount battery.
Gold plated pins, high conductivity wire, ensure fast and stable transmission.
Flexible cable design, can extend about 100cm, more convenient to use.
Andoer AD-VFU battery plate is designed to power your photography devices. It provides 4 kinds of voltage: USB 5V / 7.2V / 12V and 14.8V, fits different devices.
Features:
Standard V-lock plate, compatible with V-mount battery, easy to power your photography devices.
Provides 4 kinds of voltage: USB 5V / 7.2V / 12V and 14.8V.
USB 5V allows you to power 5V devices such as smartphone and mic.
7.2V interface for DSLR camera with 7V-9V voltage output, dummy battery designed for Canon 5D2 / 5D3 camera.
12V interface for monitor or 12V LED light.
14.8V D-tap interface is designed for camcorder with 12V-16.8V voltage output, such as for BMCC and BMPCC.
Designed with 15mm rod clamps, support angle adjustment, ideal for kinds of support rail system.
Features:
NP-FW50 dummy battery coupler, a practical power supply adapter for cameras.
Compatible with Sony A7/ A7II/ A7R/ A7S/ A7RII/ A7SII/ A6000/ A5000/ A3000/ NEX5/ NEX3... ILDC cameras.
With USB plug, you can power your camera via a 5V 2A power bank easily.
Spring connection cable design, flexible and convenient to use.
Good stability, high current output, low static current.
Features:
The battery plate is compatible with Sony NP-F550/F570, NP-F750/F770, NP-F950/F970 battery.
Supports DC 8V & DC 12V output voltages, can be used as power supply adapter of different devices.
You can install the battery plate to camera cage or other bracket via 1/4 inch screw or the included cold shoe adapter for more convenient usage.
Comes with a FW50 dummy battery coupler, which is compatible with Sony A7/A7R/A7S/A7II/A7RII/A7SII/A6300/A6400/A6500, etc.
With this battery plate + dummy battery kit, you can connect external battery power source to your camera to achieve long time shooting.
Features:
The battery plate is compatible with Sony NP-F550/F570, NP-F750/F770, NP-F950/F970 battery.
Supports DC 8V & DC 12V output voltages and with dual USB interfaces, can be used as power supply adapter of different devices; and with a type-C input for convenient battery charge.
You can install the battery plate to camera cage or other bracket via 1/4 inch screw or the included cold shoe adapter for more convenient usage.
Comes with a DMW-DCC8 dummy battery coupler, which is compatible with Panasonic G6/G7/G80/G81/G85/FZ2500/FZ2000/FZ300, etc.
With this battery plate + dummy battery kit, you can connect external battery power source to your camera to achieve long time shooting.
Features:
ACK-E10 dummy battery coupler, a practical power supply adapter for replacement of LP-E10 battery.
Compatible with Canon EOS Rebel T3/T5/T6/T7/T100/Kiss X50/Kiss X70/1100D/1200D/1300D/2000D/4000D.(Not suitable for EOS Rebel T3i, T5i, T6i, M)
AC power adapter with 100-240V input voltage, 8V 3A output, and extra long cable for more convenient indoor shooting.
Connect the adapter to power source and put the coupler into the battery compartment to provide stable and continuous power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again.
Features:
ACK-E10 dummy battery coupler, a practical power supply adapter for replacement of LP-E10 battery.
Compatible with Canon EOS Rebel T3/T5/T6/T7/T100/Kiss X50/Kiss X70/1100D/1200D/1300D/2000D/4000D.(Not suitable for EOS Rebel T3i, T5i, T6i, M)
USB plug is designed with voltage conversion circuit, and works with DC 5V 2A-4A power source.
Connect the USB plug to power source and put the coupler into the camera battery compartment to provide stable and continuous power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting, no need to replace camera battery again and again.
Features:
NP-W126 dummy battery coupler, a practical power supply adapter for Fuji cameras.
Compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
AC power adapter with 100-240V input voltage, 8.4V 2A output, and extra long cable for more convenient indoor shooting.
Fully coded, plug and play, providing stable power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting.
This is a V-lock adapter compatible for your V-mount battery. With it, you can fix your V-mount battery more stably on the V-mount battery plate.
Features:
This is a V-lock adapter compatible for your V-mount battery.
With it, you can fix your V-mount battery more stably on the V-mount battery plate.
Comes with 3 screws for you to mount it easily.
Compact and solid design.
With this V-lock battery adapter, you can fix V-mount battery on your devices stabler.
Features:
V-lock adapter compatible for V-mount battery. (Battery is not included.)
Help to fix your V-mount battery on the battery plate stably.
Made of metal, strong and solid for long time use.
Features:
NP-FW50 dummy battery to Ronin-S stabilizer power adapter cable.
One end of the cable plugs into the power port on the Ronin-S, and the dummy battery end connects to the camera.
Compatible with Sony A7/A7R/A7S/A7II/A7RII/A7SII/A6300/A6400/A6500 mirrorless cameras.
Input voltage 12V, output voltage 7.2V.
With this dummy battery power adapter cable, you can use your gimbal stabilizer to power your camera conveniently.
Features:
Dummy battery DC coupler, as a practical power supply adapter for cameras.
Designed for ATOMOS, Viltrox and Aitus monitors that powered by NP-F750 battery.
Largely prolong camera shooting hours or devices service time.
Fully decoded, plug to use directly.
Connector: 5.5 * 2.5mm, spring cable, flexible and convenient to use.
Features:
NP-W126 dummy battery coupler, a practical power supply adapter for Fuji cameras.
Compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
D-Tap to 4017 cable, works with 10-24V D/P-Tap power source.
Designed with voltage reduction module, providing stable power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting.
Features:
NP-W126 dummy battery coupler, a practical power supply adapter for Fuji cameras.
Compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
USB to 4017 cable, works with DC 5V 2.1A-4.0A power source, and comes with a power adapter for convenient usage.
The USB plug is designed with voltage conversion circuit, providing stable and safe power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting.
Features:
The battery plate is compatible with Sony NP-F550/F570, NP-F750/F770, NP-F950/F970 battery.
Supports DC 8V & DC 12V output voltages and with dual USB interfaces, can be used as power supply adapter of different devices; and with a type-C input for convenient battery charge.
You can install the battery plate to camera cage or other bracket via 1/4 inch screw or the included cold shoe adapter for more convenient usage.
Comes with a EN-EL15 dummy battery coupler, which is compatible with Nikon D7000/D800/D800E, etc.
With this battery plate + dummy battery kit, you can connect external battery power source to your camera to achieve long time shooting.
Features:
NP-FZ100 dummy battery to Ronin-S stabilizer power adapter cable.
One end of the cable plugs into the power port on the Ronin-S, and the dummy battery end connects to the camera.
Compatible with Sony A7 III/ A7R III/ A7R IV/ A9/ A9 II cameras.
Input voltage 11V-18V, output voltage 8.2V.
With this dummy battery power adapter cable, you can use your gimbal stabilizer to power your camera conveniently.
Features:
NP-W126 dummy battery coupler, a practical power supply adapter for Fuji cameras.
Compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
DC4.0 * 1.7mm female plug, providing stable and safe power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting.
Features:
NP-W126 dummy battery coupler, a practical power supply adapter for Fuji cameras.
Compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
USB to 4017 cable, works with DC 5V 2.1A-4.0A power source.
The USB plug is designed with voltage conversion circuit, providing stable and safe power supply for your camera.
Enables you to use external power source with your camera to achieve long time shooting.
Features:
USB port, plug and play, very convenient.
Need 5V 2A power bank, mobile power or charging plug (not included) for power supply, largely prolong the shooting time of your camera.
Compatible with Sony ILDC cameras, such as compatible with Sony NEX-3/5/6/7 series, A33, A37, A35, A55, a7, a7R, a7II, A6000, A6300, etc.
Adopts multi-protection technology, such as short circuit protection, over-voltage protection and over-current protection, which ensures the absolute safety during use.
Cable length is up to 1.5m. Long enough, very convenient to put your own power bank or mobile power in your pocket or bag, or at somewhere else.
