Andoer NP-F to V-mount converter provide a platform for you to power devices with V-mount battery plate by NP-F series battery, such as NP-F550/NP-F750/NP-F970.

Features:
NP-F to V-mount battery converter.
With it you can power devices with V-mount battery plate by NP-F series batteries, such as NP-F550/NP-F750/NP-F970.
Dual plates can largely prolong device service time. 
With test button and indicators for you to check the remaining battery power directly.

When you are outdoor for shooting, mobile phone or other USB devices is lower power, it should be very infrustrated. Our this D-tap to USB Adapter will help you out of the problem.

Features:
Smartphones, monitors and BMCC can be powered by the adapter when D-tap 2 pin male input connects with V-mount battery.
Monitors and BMCC can be powered by the adapter's D-tap 2 pin female output.
Smartphones can be powered by the adapter's USB port.
Power Input (Standard Male D-Tap): 11~17V 10A(Max)
Power Output (Standard Male D-Tap): 11~17V 10A(Max)
Power Output (USB): 5V 1.6A(Max)

AC power supply, replacement for LP-E8. It is a power necessary for long time camera/devices video shooting/photography, such as for Canon 700D 650D 600D 550D /Rebel T5i T4i T3i T2i Kiss X5 X4 X6i X7i DSLR camera & etc.

Features:
AC power adapter, replacement for LP-E8 battery, 100% compatible.
Enable you to power the camera with AC power supply, no need to change battery.
Perfect for long time camera shooting.
Fully coded, plug and use.
AC input 250V 10A.
DC output 7.6V 2A.

Features:
USB port, plug and play, very convenient.
Need 5V 2A power bank, mobile power or charging plug (not included) for power supply, largely prolong the shooting time of your camera.
Suitable for Canon EOS 550D, 600D, 650D, 700D DSLR cameras.
Adopts multi-protection technology, such as short circuit protection, over-voltage protection and over-current protection, which ensures the absolute safety during use.
Cable length is up to 1.5m. Long enough, very convenient to put your own power bank or mobile power in your pocket or bag, or at somewhere else.

Fully decoded dummy battery is suitable for Nikon DSLR camera, used to extend your shooting time.

Features:
Compatible for Nikon DSLR camera.
Allow you to run your camera via a camera AC adapter, extend your shooting time.
Can use it with 7.2V V-mount battery plate, power your camera via V-mount battery.(Battery not included)
Fully decoded, can show the battery condition.

With this battery plate, you can turn NP-F970 series batteries into a replacement for NP-FW50. It is compatible for Sony NEX 5 series/Nex 7 series/DSC-RX10, DSCRX10/B, WW808143/α7 series/α7R/α7S/α7II/α3000/α5000/α5100/α6000/α6300/α7s II/α7m II. Aluminum alloy plate, strong & durable for long time use.

Features:
NP-F970 to NP-FW50 battery adapter, turn NP-F970 series batteries into a replacement for NP-FW50.
Largely prolong shooting camera shooting hour.
With an indicator light, red for low power condition.
Durable aluminum alloy battery plate, with protective rubber on the back.
Comes with 1/4" screw & hot shoe mount, can be mount on camera/rig.

Compatibility:
For Sony NEX 5 series(Alpha NEX-5, Alpha NEX-5A, Alpha NEX-5C, Alpha NEX-5CA, Alpha NEX-5CD, Alpha NEX-5D, Alpha NEX-5H, Alpha --NEX-5CH, Alpha NEX-5K)
--NEX 7 series
--DSC-RX10, DSCRX10/B, WW808143
--α7(Alpha a7, a7R, ILCE7/B, ILCE7K/B, ILCE7R/B, ILCE-7, ILCE-7R)
--α7R / α7S / α7II / α3000 / α5000 / α5100 / α6000 / α6300 / α7s II / α7m II

Andoer D-TAP male 2 pin male to DC 5.5 * 2.1mm adapter cable is suitable for Anton V-mount battery DSLR cage rig power supply. It can be extended to about 2m/6.5ft.

Features:
D-TAP male 2 pin rewirable plug.
DC 5.5 * 2.1mm plug right angled.
Cord OD is 4.5mm PU spring coiled with 0.5mm² copper wire.
The cable can be extended to 2m long.
Compatible for Anton Bauer V-mount battery DSLR camera cage rig.

Andoer D-tap to USB adapter is perfect for outdoor shooting. Connecting with V-mount battery, it can supply power for your monitor, camcorder, even mobile phone or other USB devices.

Features:
The D-tap 2 pin male input is compatible for all V-Mount battery.
Connect the male input with V-mount battery, the D-tap 2 pin female output can supply power for monitors and for BMCC.
The USB port is designed for your smartphones or other USB devices.
Portable size, perfect for outdoor shooting and power supply.

LP-E6 type is designed for Canon DSLR camera. You can use it to connect your camera with a V-mount battery plate or camera AC adapter to extend the shooting time.

Features:
LP-E6 DC coupler for Canon DSLR camera.
Allow you to use the camera with camera AC adapter, not worry about battery recharging.
Can also use it to connect your camera with 7.2V V-mount battery plate, prolong your shooting time.
Fully decoded dummy battery, can show the battery status.

Andoer DMW-DCC12 is designed for Panasonic DMC-GH3/DMC-GH4 camera, helping your prolong your shooting time.

Features:
Designed for Panasonic DMC-GH3/DMC-GH4 camera.
Used to prolong your shooting time effectively.
Half-decoded dummy battery, easy to use.
Plug one end into the camera, and the other into power supply devices(V-mount battery plate/ camera AC adapter etc).

AC power adapter, replacement for NP-FW50 battery, enable you to shoot for a long time without replacing battery.

Features:
Replacement for NP-FW50 battery, 100% compatible.
Compatible for Sony a7 a7ii a7s a7r a7sii a7rii a6500 a6300 a6000 a5000 a5100 nex-5 nxx-7 & etc.
Enable you to power the camera by AC power adapter directly, perfect for long time shooting.
AC input 100 - 240V, 50-60Hz.
DC output 7.6V 2A.
Intelligent protection of over-current, over-voltage, short-circuit, over-heat.

Features:
Connects any battery / battery mount with D-tap female connector to any camera / monitor designed to be powered by LP-E6 battery.
Cable Length: 92cm (36") - Straight.
Built-in power conditioner for voltage regulation (14.4V or 12V power source), with reverse polarity protection and short-circuit protection.
High power output, suitable for cameras, monitors and LED lights. Largely prolong the working time of them.
Can prolong the usage time for Zacuto EVF when use the dummy battery adapter with external battery.

Features:
The battery plate is compatible with Sony NP-F550/F570, NP-F750/F770, NP-F950/F970 battery.
Supports DC 8V & DC 12V output voltages, can be used as power supply adapter of different devices.
You can install the battery plate to camera cage or other bracket via 1/4 inch screw or the included cold shoe adapter for more convenient usage.
Comes with a power adapter cable, which is compatible with BMPCC 4K/ 6K Cameras.
With this battery plate + dummy battery kit, you can connect external battery power source to your camera to achieve long time shooting.

Features:
The battery plate is compatible with Sony NP-F550/F570, NP-F750/F770, NP-F950/F970 battery.
Supports DC 8V & DC 12V output voltages and with dual USB interfaces, can be used as power supply adapter of different devices; and with a type-C input for convenient battery charge.
You can install the battery plate to camera cage or other bracket via 1/4 inch screw or the included cold shoe adapter for more convenient usage.
Comes with a NP-W126 dummy battery coupler, which is compatible with Fuji Cameras X-A1/X-A2/X-A3/X-E1/X-E2/X-M1/X-Pro/X-T1/X-T2/X-T10/HS33EXR/HS35EXR/HS50EXR, etc.
With this battery plate + dummy battery kit, you can connect external battery power source to your camera to achieve long time shooting.

Features:
The battery cover is designed to be compatible with GoPro Max.
Pre-reserved USB port provides easy access while battery and SD card are protected from falling out.
Allow Type-C charging, so you can use power bank together with it, perfect for continuous shooting.
Special designed for vlog filmmaking, more convenient for video shooting.
Lightweight and durable for daily use.

Features:
Andoer D-TAP to NP-FW50 DC battery coupler cable allows you to power for Sony mirrorless cameras using a NP-FW50 battery with an external high capacity V-mount or Gold mount batteries, such as for Anton Bauer, for Sony, for Wondlan, for farseeing, for BP, for PRO-X, for ROLUX, for Dynacore...
It is helpful for long time shooting out of door.
It is alse used to power the EVFs and monitors.
There is build-in voltage tranformer, support 10V-20V wide voltage input.
Straight cable, 100cm cable length.

Compatible Battery: For Sony NP-FW50
Compatible Cameras:
For Sony NEX 3 series (Alpha NEX-3, Alpha NEX-3A, Alpha NEX-3C, Alpha NEX-3CA, Alpha NEX-3CD, Alpha NEX-3D, Alpha NEX-3CH, Alpha NEX-3H, Alpha NEX-3CK, Alpha NEX-3K)
For Sony NEX 5 series (Alpha NEX-5, Alpha NEX-5A, Alpha NEX-5C, Alpha NEX-5CA, Alpha NEX-5CD, Alpha NEX-5D, Alpha NEX-5H, Alpha NEX-5CH, Alpha NEX-5K)
For Sony NEX 7 series
For Sony DSC-RX10, DSCRX10/B, WW808143
For Sony α7 (Alpha a7, a7R, ILCE7/B, ILCE7K/B, ILCE7R/B, ILCE-7, ILCE-7R)
For Sony α7R, α7S, α7s II, α7II
For Sony α3000, α5000, α5100, α6000, α7000, α6300

V-mount / Anton Bauer D-Tap to NP-FW50 dummy battery adapter, coiled cable.

Features:
D-TAP to NP-FW50 DC battery coupler,  allow you to power devices using NP-FW50 battery with an external high capacity V-mount or Gold mount batteries, such as for Anton Bauer, for Sony, for Wondlan, for farseeing, for BP, for PRO-X, for ROLUX, for Dynacore & etc.
Compatible for Sony a7 a7ii a7s a7r a7sii a7rii a6500 a6300 a6000 a5000 a5100 nex-5 nxx-7 & etc cameras.
Coiled cable design, highly elastic and neat.
Input voltage: 11-17V wide voltage input.
Output:  8V 2A.

Features:
Durable aluminum alloy V-lock plate designed for V-mount batteries.
Quick release lock design make it quick and easy for you to mount/remove the battery.
With multiple mounting holes & grooves, you can attach it to camera cage rig/shoulder rig/monitor frame directly.
Compatible with Ursa Mini/DJI Ronin M/MX/Sony FS7/FS5 or 15mm rod clamp.
The two integrated protruding parts can keep the battery in the right place.